KitchenAid KG25H0XMC Instrucciones Y Recetas página 17

All manuals and user guides at all-guides.com
USING THE POURING SHIELD*
Attaching the Pouring Shield*
1. Make sure the speed control
lever is set to the OFF/0 position.
2. Unplug the stand mixer or
disconnect power.
3. Attach desired accessory and
raise the mixing bowl.
4. Slide pouring shield collar
around beater shaft, centering
collar over rim of bowl.
Using the Pouring Shield
Pour ingredients into the mixing
bowl through the chute portion of
shield.
IMPORTANT: Make sure the guides
on the bottom of the chute rest
on the rim of the bowl to keep
ingredients from falling outside the
bowl as they are added.
Removing the Pouring Shield
1. Make sure the speed control
lever is set to the OFF/0 position.
2. Unplug the stand mixer or
disconnect power.
3. Remove pouring chute
from collar.
4. Slide pouring shield collar
off bowl.
5. Lower the bowl support by
turning the bowl-lift lever
clockwise.
6. Remove accessory and the
mixing bowl.
Cleaning the Pouring Shield
Wash in warm sudsy water. If you
wish, you may place on the top rack
of your dishwasher.
17 17 17 17
*If Pouring Shield is included.
Pouring
Chute