HOLZMANN MASCHINEN ED 300FD Manual De Instrucciones página 26

11.3 Safety instructions
Warning signs and / or sticker on the machine that are illegible or removed shall be
replaced immediately!
Applicable local laws and regulations may specify the minimum age of the operator and
limit the use of this machine!
To avoid malfunctions, damage and physical injury MUST be observed:

Keep your work area dry and tidy! An untidy work area may cause accidents. Avoid
slippery floor.

Make sure the work area is lighted sufficiently

Do not overload the machine

Provide good stability and keep balance all times

Avoid abnormal working postures! Make sure you stand squarely and keep balance at
all times.

Keep away from the running chuck!

Always stay focused when working. Reduce distortion sources in your working
environment. The operation of the machine when being tired, as well as under the
influence of alcohol, drugs or concentration influencing medicaments is forbidden.

Attach the machine to the workbench

Respectively trained people only and only one person shall operate the machine.

Do not allow other persons, particularly children, to touch the machine or the cable.
Keep them away from your work area.

Make your workshop childproof.

Make sure there is nobody present in the dangerous area. The minimum safety
distance is 2m

Wear suitable work clothes! Do not wear loose clothing or jewelry as they might get
caught in moving parts and cause severe accidents! Wear a hair net if you have long
hair.

Use personal safety equipment: ear protectors and safety goggles when working with
the machine.
 Never leave the machine running unattended! Before leaving the working area switch
the machine off and wait until the machine stops.
 Always disconnect the machine prior to any actions performed at the machine.
 Avoid unintentional starting
 Do not use the machine with damaged switch
 The plug of an electrical tool must strictly correspond to the socket. Do not use any
adapters together with earthed electric tools
 Each time you work with an electrically operated machine, caution is advised! There is
a risk of electric shock, fire, cutting injury;
 Protect the machine from dampness (causing a short circuit)
 Use power tools and machines never in the vicinity of flammable liquids and gases
(danger of explosion)

Check the cable regularly for damage

When working with the machine outdoors, use extension cables suitable for outdoor
use. Protect the cable from heat, oil and sharp edges

Avoid body contact with earthed
 Before starting the machine remove any adjusting wrenches and screwdrivers
 Do not fix the workpiece with your hands
 Rotating parts can cause severe cut injuries

Keep the drills sharp and clean, so they get stuck less often and are easier to guide

Keep any machine that is not being used out of reach of children
HOLZMANN MASCHINEN GmbH www.holzmann-maschinen.at
SAFETY
26
ED300FD