Yamaha F50A Manual Del Propietário página 172

602052
FT50C/FT60B
e
r
y
t
q
e
y
w
r
t
602073
EMU00976
Removing the Propeller
1) Straighten the cotter-pin 1 and pull it
q
out using a pair of pliers.
2) Remove the propeller nut 2, washer
w
3 and spacer 4.
3) Remove the propeller 5 and thrust
000357
washer 6.
EMU00397
Installing the Propeller
cC
8 Be sure to install the thrust washer
before installing propeller, otherwise,
lower case and propeller boss may be
damaged.
8 Be sure to use a new cotter pin and
bend the ends over securely. Other-
wise, the propeller could come off dur-
ing operation and be lost.
1) Apply Yamaha Marine grease or Cor-
rosion resistant grease to the pro-
peller-shaft.
2) Install the thrust washer and propeller
on the propeller-shaft.
3) Install the spacer and washer. Tighten
the propeller nut to the specified
torque.
4-29
GB