Descargar Imprimir esta página

LAVAZZA WEGA BLUE LB 4722 Manual De Uso Y Mantenimiento página 50

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 115
Hot water
7.2
The machine is programmed by
default. Should the hot water doses
need to be modified, proceed as
follows:
Place the pot under the hot
water spout;
Press the
button for at
least 5 seconds until the
button flashes;
Press the water button
To confirm the dose, press the
button again or the
button;
When the programming is com-
plete, press the
until all of the LEDs on the push-
button panel are lit.
The system automatically exits the programming mode 30 seconds
after the last operation was carried out.
Avoid contact with the hot water nozzle, do not place your hands
or other body parts near the hot water nozzle tips.
50
176
of
;
button
Hot milk and frothed milk
7.3
(LB 4723, LB 4724, LB 4733 and LB 4734 versions)
Immerse the steam nozzle tips
into the milk;
Press the
5 seconds until the
flashes;
Select the hot milk
milk
button;
When the desired temperature
has been reached or the desired
froth has been obtained, press
either the
or the
button;
When the programming is com-
plete, press the
until all of the LEDs on the push-
button panel are lit.
Default values:
Very hot frothed milk
Hot milk
65°C
Carefully move the steam nozzle using the
specific anti-scald rubber grip (1).
Avoid contact with the steam nozzle, do
not place your hands or other body parts
near the steam nozzle tips.
The system automatically exits the
programming mode 30 seconds after the
last operation was carried out.
Keep the tips clean at all times using a cloth
dampened in lukewarm water. To keep the steam
nozzle tips in perfect working order, perform a
brief dry dispensing run after each use.
Before using the steam, carry out a dry run by
dispensing steam for a few seconds via the
button to remove any condensation water.
Only leave the steam wand immersed in the milk
for the time needed to heat it. Do not immerse
the nozzle in the milk and switch it on when the
machine is cold.
USER Manual
LB4722-LB4723-LB4724 LB4733-LB4734
button for at least
button
or frothed
or
button again,
button
70°C
1

Publicidad

loading