English
Turn the master switch to 0
N
Actuate the spray gun until water
N
only drips from the spray head – the
machine is now depressurized
Release trigger
N
1
Press the safety latch (1) in the
N
direction of the arrow – the spray
gun is locked to prevent inadvertent
operation
Unplug the power plug from the
N
socket
Disconnect water intake hose from
N
machine and water supply
After use
Roll the high-pressure hose and
N
power cable up on the brackets
provided for this purpose – see
"Main parts of the machine"
54
Storing the Machine
Store the machine in a dry room where it
is protected from frost.
If protection from frost cannot be
ensured:
Turn off water supply
N
Fill glycol-based antifreeze – like
N
that used in automobiles – through
the filling port into the water tank
Aim the spray gun without spray
N
lance into a suitable container
Switch on the machine with the
N
spray gun open (cold water
operation)
Top up the liquid drawn from the
N
water tank until approx. 4 liters of
antifreeze have been drawn through
the pump or antifreeze emerges
from the spray attachment
Operate the spray gun 2 - 3 times
N
during the intake process
Wait until the water tank is empty
N
Turn the master switch to "0"
N
Keep leftover antifreeze in a sealed
N
container
When reusing the machine, the
antifreeze can be collected and returned
to the pump after work
Refer to the section "Fill fuel tank".
RE 521, RE 551 PLUS, RE 581, RE 581 PLUS