Sound and vibration levels
Sound pressure level L
to ISO 3744 (at
p
a distance of 1 m)
RE 521:
RE 551 PLUS:
RE 581, RE 581 PLUS:
Sound power level L
to ISO 3744
w
RE 521:
RE 551 PLUS:
RE 581, RE 581 PLUS:
Vibration level a
at the handle
hv
according to ISO 5349
RE 521:
RE 551 PLUS:
RE 581, RE 581 PLUS:
For the sound pressure level and the
sound power level, the K - factor in
accordance with Directive 2006/42/EC =
1.5 dB(A); for the vibration level, the
K - factor in accordance with
Directive 2006/42/EC = 2.0 m/s
REACH
REACH is an EC regulation and stands
for the Registration, Evaluation,
Authorisation and Restriction of
Chemical substances.
For information on compliance with the
REACH regulation (EC) No. 1907/2006
see www.stihl.com/reach.
RE 521, RE 551 PLUS, RE 581, RE 581 PLUS
Special Accessories
Pipe cleaning kit
72.5 dB(A)
73.1 dB(A)
In lengths 10 or 20 m
74.1 dB(A)
87.1 dB(A)
87.7 dB(A)
88.6 dB(A)
2
There is a mark (arrow) at the end of the
< 2.5 m/s
cleaning hose:
2
< 2.5 m/s
2
< 2.5 m/s
Push the hose into the pipe to be
N
cleaned until this mark is reached –
then switch on the machine
When this mark appears as the hose is
pulled out of the pipe:
Switch off the machine
N
2
.
Actuate the spray gun until the
N
machine has been depressurized
Pull the hose out of the pipe
N
completely
The hose must never be pulled out of the
pipe when the machine is switched on.
Other special accessories
Rotary washing brush – exchangeable
brush insert.
Wash brush – for mounting on straight or
angled spray lances.
Spray lance, straight – in lengths 350,
500, 1070, 1800 or 2500 mm.
Spray lance, angled – in length
1070 mm; spray lance, angled – do not
direct around blind corners behind which
other people may be concealed.
Pencil-jet nozzle – 0°-jet angle for
extremely hard, narrow jet.
High-pressure nozzle – 15°, 30° or 60°
jet angle.
Steam nozzle – 1.3 mm, for professional
steam cleaning.
Rotary nozzle with spray lance – in
length 950 mm; for large areas and very
stubborn dirt.
High-pressure hose extension – DN 08,
connection M27x1.5; steel braided,
reinforced, in lengths 10, 15 or 20 m.
Always use only one high-pressure hose
extension.
High-pressure hose adapter –
connection M27x1.5; for connection of
high-pressure hose and high-pressure
hose extension.
Adapter – for connection of accessories
with screw coupling and spray guns with
push-in coupling.
Sand and wet-blasting unit – for sand-
blasting, e. g., stone or metal.
Water filter – for purifying water from the
tap.
Central screw-on tube – for attaching a
jack ring to the cleaner.
Jack ring – for transporting the cleaner
with a crane.
Ask your STIHL servicing dealer for
current information about this and other
special accessories.
English
63