VBM REPLICA HX Manual De Instrucciones página 74

+
4
5
34
-
12.1,
3
ADJUSTING
PRESSURE.
2
You can adjust the pressure and hence the temperature of the water in the boiler by
means of the pressure switch viewing it on the pressure gauge (1).
•
Remove the cup heating plate (2) as described in the paragraph on installation.
•
Act on the screw (3) of the pressure switch turning it CLOCKWISE to decrease
the pressure and ANTICLOCKWISE to increase it.
12.2,
ADJUSTING THE PUMP PRESSURE.
1
You can adjust the pump pressure checking it on the pressure gauge (4).
•
Remove the cup heating plate (2) as described in the paragraph on installation.
•
Act on the screw (5) of the pump turning it CLOCKWISE to decrease the
pressure and ANTICLOCKWISE to increase it.
W ARNING: These operations must be carried out by a qualified
technician operating with extreme care.
THE BOILER
12,
ADJUSTMENTS.
TEMPERATURE/