Flow Switch - BSV BSPOOL BSsalt-10 Manual De Usuario

displayed on the right side of production in the main screen. This will indicate
that the cover is activated.
Once the cover detect ion is activated, the system will ask which is the type of
sensor you have installed: Normally open (N.O.) or Normally Closed (N.C.)
If chlorination is carried out with the cover in place, when it is
removed, the pool should not be used straightaway. It is
better to wait ½ hour for any vapours between the water and cover
to dissipate.

4.2.4.7 Flow switch

The flow sensor detects whether or not there is water flow in the piping. If it
detects that there is no flow, the production will stop, and an alarm will sound
accompanied by a red warning LED. Once the flow has been reestablished, the
equipment will return to normal operation.
The "Flow Kit" (optional) is necessary to activate the flow sensor, which is
done by pressing OK in the menu Flow Switch = Y.
94 / 166
Manual EVO v.4