6- Ph Menu - BSV BSPOOL BSsalt-10 Manual De Usuario

4.2.5.3- Super chlorination
Select this option if you require super-chlorination of your swimming pool,
bearing in mind the following:
If the equipment is working in semi-automatic mode (with the NTC
-
PROBE KIT ), the equipment will calculate the time necessary
depending on the volume and Temperature. The filtering time to perform
super-chlorination will be displayed on the screen.
- Without a Temperature probe, super-chlorination will be carried out for
24 hours. If filtration is stopped, super-chlorination is suspended.
4.2.5.4- Calibration of the free chlorine probe
If you have a free chlorine probe, a menu will appear for you to calibrate it.
Once the reading has stabilized and the chlorine measurement has been taken
with DPD1,
adjust the PPM value provided by the DPD1 measurement.

4.2.6- pH menu

With this menu, you can adjust the parameters related to the pH adjustment of
your swimming pool. It only appears in EVO series equipment.
4.2.6.1- Main screen
The reading of the pH probe can be seen in the 3rd line of the main screen.
pH adjustment does not start up until 5 minutes after the equipment
has been switched on.
Manual EVO v.4
97 / 166