Publicidad
Idiomas disponibles
Idiomas disponibles
Wire rack
The open side must be facing the
appliance door and the curvature
must be at the bottom (i.e.
Tray, e.g. uni-
The sloping edge of the accessory
versal pan or
must be facing towards the ap-
baking tray
pliance door.
6
Before using for the first time
Configure the settings for initial start-up. Clean the ap-
pliance and accessories.
6.1 Setting the time
Once the appliance is connected to a power supply,
:
flashes on the display and the
up continuously. Set the time.
Use
or
to set the time.
1.
Press
.
2.
Note: Once the set time has elapsed, the time is auto-
matically saved.
6.2 Cleaning the appliance before using it
for the first time
Clean the cooking compartment and accessories be-
fore using the appliance to prepare food for the first
time.
Remove the accessories from the cooking compart-
1.
ment and remove the shelves. → Page 44
Completely remove any leftover packaging, e.g.
2.
small pieces of polystyrene, from the cooking com-
partment.
7
Basic operation
7.1 Switching on the appliance
Use the function selector to set the type of heating.
1.
a Each function has a default temperature or grill set-
ting.
).
symbol lights
Before using for the first time en
To place the accessory at shelf positions with pull-
3.
out rails, pull out the pull-out rails.
Wire rack or
Position the accessory so that its
baking tray
edge is behind the lug
pull-out rail.
Note: The pull-out rails lock in place when they are
fully pulled out. Gently push the pull-out rails back
into the cooking compartment.
Push the accessory all the way in, making sure that
4.
it does not touch the appliance door.
Note: Take any accessories that you will not be using
out of the cooking compartment while the appliance is
in operation.
Some parts are covered with a protective film. Re-
3.
move this scratch protection film.
Clean the outside of the appliance with a soft, damp
4.
cloth.
Clean the cooking compartment with hot soapy wa-
5.
ter.
To eliminate the new-appliance smell, heat up the
6.
empty appliance with the door closed.
Turn the function selector to
7.
Set the maximum temperature.
8.
If you are heating up the appliance for the first time,
you may hear crackling noises from the cooking
compartment.
Ventilate the kitchen while the appliance is heating.
9.
Switch off the appliance after 1 hour.
10.
Allow the appliance to cool down.
11.
Once the cooking compartment has cooled down,
12.
clean the smooth surfaces with soapy water.
Install the rails. → Page 44
13.
If necessary, clean the door panels. → Page 44
14.
6.3 Cleaning the accessories
Clean the accessory thoroughly with soapy water
▶
and a soft dish cloth.
Use the temperature selector to select the temperat-
2.
ure or grill setting.
a The appliance starts heating.
Note: The temperature control displays the current
heating status.
on the
.
37
Publicidad
