Publicidad
Idiomas disponibles
Idiomas disponibles
FAST PREHEATING
1.
Turn the "Functions" knob to the symbol
2.
Confirm by pressing
3.
If the proposed temperature is that desired, press button
previous paragraphs. The message PRE appears on the display. When the set temperature is reached, the corresponding
value (e.g. 200°) and an acoustic signal will sound. At the end of preheating, the oven automatically selects the
conventional function
At this point food can be placed in the oven for cooking.
4.
If you wish to set a different cooking function, turn the "Functions" knob and select the desired function.
SETTING COOKING TIME
This function can be used to cook food for a set length of time, from a minimum of 1 minute to the maximum time allowed by
the selected function, after which the oven switches off automatically.
1.
Once the temperature is confirmed, the symbol
2.
Turn the adjustment knob to display the desired cooking time.
3.
To confirm the cooking time, press button
The oven automatically confirms your selection 10 seconds after the last operation.
SETTING END OF COOKING TIME /START DELAYED
IMPORTANT: the start delayed setting is not available for the following functions: FAST PREHEATING, BREAD/PIZZA,
GENTLE CONVECTION BAKE.
N.B.: with this setting, the selected temperature is reached in a more gradual way, so cooking times will be slightly
longer than stated in the cooking table.
The end of cooking time can be set, delaying the start of cooking by up to a maximum of 23 hours and 59 minutes. This can only
be done once cooking time has been set.
After setting cooking time, the display shows the end of cooking time (for example 15:45) and the symbol
To delay the end of cooking time, and thus also the cooking start time, proceed as follows:
1.
Turn the "Browse" knob to display the time you wish cooking to end (for example 16:00).
2.
Confirm the selected value by pressing button
has been made correctly.
3.
The oven will automatically delay the start of cooking so as to finish cooking at the set time.
INDICATION OF THE RESIDUAL HEAT INSIDE THE OVEN
If at the end of cooking, or when the oven is switched off, the temperature inside the oven is over 50°C, the display shows the
word HOT and the current temperature. When the residual heat reaches 50°C, the display shows the current time again.
to select the fast preheating function.
: the settings are shown on the display.
3
.
.
3
3
. To change the temperature, proceed as described in
3
flashes.
: the two dots of end of cooking time flash, indicating that the setting
GB9
flashes.
Publicidad
