ASSEMBLY
Engine Oil
The generator is shipped
WITHOUT OIL in the engine.
Place the generator on a level
surface. Open the right
maintenance cover by turning its
latch counterclockwise.
Remove the oil filler cap.
Add enough of the
recommended oil to bring the oil
level to the upper limit of the oil
filler neck.
Use a 4-stroke motor oil that
meets the requirements for API
service category SE or later (or
equivalent).
SAE 10W-30 is recommended for
general, all-temperature use.
Other viscosities in the chart may
be used when the temperature in
your area is within the indicated
range.
Reinstall the oil filler cap securely.
Close the right maintenance
cover by turning its latch
clockwise.
Fuel
Refer to page 49.
80
AMBIENT TEMPERATURE
OIL FILLER CAP
OIL FILLER NECK
UPPER
LIMIT