4. Fit the grommet into the battery maintenance cover knockout.
5. Plug the remote control cable into the connector.
6. Install the battery maintenance cover and tighten the cover screw.
REMOTE CONTROL
CABLE
BATTERY MAINTENANCE COVER
7. To avoid accidentally unplugging the remote control cable, secure the cable
to the generator frame with a cable tie as shown.
• Never operate the generator with the
battery maintenance cover open, as
poor engine and generator
performance will result.
• Install the plug to the connector when
the remote control kit is removed.
OPTIONAL PARTS
REMOTE CONTROL CABLE
GROMMET
REMOTE CONTROL BOX
CABLE TIE
PLUG
83