Coway AIRMEGA ProX Manual Del Usuario página 14

04. MAINTENANCE
Filter maintenance/replacement notification function
The Pre-filter maintenance indicator is turned on when the filter is used 100% and Max2 filter replacement indicator
is turned on when the filter is used 95%.
To deactivate the indicator and reset the filter usage, press and hold the airflow speed button for 3 seconds.
* If the Pre-filter maintenance notification indicator and Max2 filter replacement indicator are turned on at the same
time, both are deactivated.
Forced filter usage reset mode
This function is to reset the filter usage if a user has cleaned or replaced the filter in advance before filter
maintenance or replacement notification. Through this action, you can manage the usage of the Filter.
13
1_
While the filter maintenance or filter
replacement notification has yet to occur,
press and hold the Airflow speed button for
3 sec. 3 sec.
more than 3 seconds.
2_
The filter maintenance indicator lights up
and displays the current filter usage through
the digital indicator. Press the Airflow speed
button and select the filter to reset its usage.
When choosing the filter, follow the following
order.
3_
After selecting the filter, press and hold the
Airflow speed button for more than 3 seconds
to reset filter usage.
3 sec. 3 sec.
4_
If the reset button is not pressed for more
than 7 seconds, the Forced filter usage reset
mode is canceled.
NOTE
Pre-filter (PRE) → Max2 filter (MAX2) → Pre-filter (PRE)
•
3 sec. 3 sec.