dormakaba La Gard 700 Serie Guia De Instalacion página 10

The reverse side of the keypad, with the battery cover in place, appears as follows:
2. Twist the battery cover counterclockwise to detach it from the housing, as shown below:
3. Remove the battery cover and install the batteries. Use the labels in the battery tray to ensure the proper
+/- orientation for each battery.
4. The battery cover can be reinserted the same way that it was removed: by lining up the posts (with the
"this side up" label oriented as pictured) and twisting the cover so that the posts engage with the battery
cover.
5. Replace the body of the keypad back onto the keypad by lining up the divot with the triangle on the
keypad and rotating clockwise until the keypad body stops moving.
Low Profile Keypad
For Low Profile Keypads, do the following to access and install the backup battery:
1. If backup (emergency) power is needed, flip up the battery panel on the lower housing, which will release a
battery strap.
2. Connect the 9V battery to the strap and use that power to get into the safe. After the safe door is
opened, disconnect the 9V battery and fold the strap back into the Low Profile Keypad.
dormakaba USA Inc. | Keypad Installation Guide 7033.0322 Rev D 07/22
9