dormakaba La Gard 700 Serie Guia De Instalacion página 5

b. Run the cable through the opening in the cable holder and place the cable holder over the
corresponding posts in the Keypad body
c. Run the safe lock cable through the opening in the safe door
d. Place the Keypad over the opening in the channel of the baseplate and rotate 25 degrees to the
vertical position. Some resistance occurs when winding up the anti-rotate device
e. The anti-rotate device will click into place, permanently locking the Keypad into a vertical
position; the Keypad cannot be removed from the safe door without damaging the Keypad
f. Install the swingbolt
Mount a Standard Profile Serviceable
Keypad
Follow these steps to properly mount a Standard Profile Serviceable Keypad to the safe door:
1. Drill and tap the holes into the outside of the safe wall using the provided drill and tap template. Deburr
the middle hole with a file or rotary tool.
Note: Some safe manufacturers might include these holes at the OEM level.
2. Mount the baseplate using the proper retainers for the desired lock type. Prior to mounting, align the
baseplate in the correct position using the reference arrow pointing to the top.
Note: If you are using horizontal holes, then the reference arrow should be pointing to the left.
a. For the Swingbolt application, use the retainer type shown above in Red.
dormakaba USA Inc. | Keypad Installation Guide 7033.0322 Rev D 07/22
4