dormakaba La Gard 700 Serie Guia De Instalacion página 7

Mount a Low Profile Serviceable Keypad
Follow these steps to properly mount a Low Profile Keypad to the safe door:
1. Drill and tap the holes into the outside of the safe wall using the provided drill and tap template. Deburr
the middle hole with a file or rotary tool.
Note: Some safe manufacturers might include these holes at the OEM level.
2. Mount the baseplate using the proper retainers for the desired lock type. Prior to mounting, align the
baseplate in the correct position using the reference arrow pointing to the top.
Note: If you are using horizontal holes, then the reference arrow should be pointing to the left.
c. For the Swingbolt application, use the retainer type shown above in Red.
d. For the Deadbolt and Springbolt application, use the retainer type shown above in Blue.
3. Mount the baseplate using the proper retainers for the desired lock type.
Note: This process is very similar to the method described for the Standard Profile Serviceable Keypad,
however the baseplates are different.
4. Release retaining latch with a small flat blade screwdriver or plastic shim and pull partially out.
dormakaba USA Inc. | Keypad Installation Guide 7033.0322 Rev D 07/22
6