Publicidad
①
12
②
③
English
TO REMOVE/REPLACE TETHER
To remove the tether connecting the side pod and base plate, compress the tether
spring hook at the side pod ① and pull the tether out from the slot ②.
To remove tether from the base plate, remove base plate from helmet. Pull tether until
it stops, then bend it toward the back of the base plate to release it ③. To reinstall,
reverse the removal procedure.
TO REMOVE/REPLACE CHEEK PADS
Emergency Release Tabs
This helmet has an emergency release system. The emergency release tabs allow
emergency medical technicians to smoothly remove the helmet's cheek pads in order
to assist in removal of the helmet from the head of an injured rider after an accident.
There are tabs between the shell and the cheek pads on each side of the helmet.
Emergency medical technicians can pull the tabs downward to remove the cheek pads.
WARNING
The emergency release tabs are for use only by emergency medical technicians.
Never use the emergency release tabs for routine, everyday removal of the cheek pads.
Use of the emergency release tabs for routine removal may damage the cheek
pads and release tabs.
WARNING
An exposed release tab strap can catch on your clothing or other objects while
you are riding.
Never allow more than the tab of the release tab strap to be exposed outside of
the cheek pads.
Always ensure that the release tab strap is in its proper position before using
the helmet.
Always reset the release tab strap to its proper position as depicted in the
instruction manual when placing the cheek pads back on the helmet.
Publicidad
