Publicidad
Idiomas disponibles
Idiomas disponibles
BLADE INSTALLATION (Continued)
2. Position the blade (H) over the blade holder
(G) with threaded posts showing. Make sure
the bottom edge of the blade (H) is fully seated
against the blade arm. With a Phillips
screwdriver, tighten washer-head screws (BB)
with fiber washers (CC) to secure the blade to
the blade arm. (Fig. 2)
Hardware Used
Washer-Head
BB
Screws
Fiber
CC
Washers
3. Attach blade holders (G) to the motor hub
using the screws (AA). (Fig. 3)
NOTE: Periodically check blade holder hardware
and resecure if necessary.
WARNING
To reduce the risk of personal injury,
do not bend the blade holders when
installing, balancing the blades or
cleaning the fan. Do not insert foreign
objects in between the rotating blades.
Hardware Used
Screws
AA
HOUSING SWITCH CUP/ADAPTER ASSEMBLY INSTALLATION
1. Disassemble the housing switch cup assembly
(B) by removing three preassembled screws.
(Fig. 1)
2
x 18
x 18
3
x 12
1
14
BB
G
H
AA
A
CC
G
B
Publicidad
