Harbor Breeze LP8013LAZ Manual De Instrucciones página 7

ASSEMBLY INSTRUCTIONS
1. Remove the hanger ball portion from the
downrod/hanger ball assembly (D) by loosen-
ing the set screw in the hanger ball until the
ball falls freely down the downrod. Remove the
pin from the downrod, then remove the hanger
ball. Retain the pin and hanger ball for
reinstallation in Step 4. (Fig. 1)
2. Slightly loosen the two center support
housing screws on motor arm assembly (A)
with T-handle wrench (J) as shown. (Fig. 2)
1
2
A
7
D
J