Publicidad
Idiomas disponibles
Idiomas disponibles
us_main.book.book Page 27 Tuesday, September 6, 2022 9:13 AM
5
To disconnect the appliance from the
network, delete it from the connected
appliances in the app.
NOTE
• See the Smart Functions section in the owner's
manual for more details.
Settings (Hour Mode, Convection
Auto Conversion, Oven
Temperature, Preheat Alarm Light,
Beeper Volume, Fahrenheit or
Celsius, Cooktop On Alert Volume)
Press the Settings button repeatedly to toggle
through and change oven settings.
The Settings button allows you to:
• set the hour mode on the clock (12 or 24 hours)
• enable/disable convection auto conversion
• adjust the oven temperature
• activate/deactivate the preheating alarm light
• set the beeper volume
• switch the temperature scale between
Fahrenheit and Celsius
• set the cooktop on alert volume
Setting the Hour Mode
The control is set to use a 12-hour clock. To reset
the clock to 24-hour mode, follow the steps below.
1
Press Settings once.
2
Press 1 to toggle between a 12-hour and 24-
hour clock.
3
Press START to accept the change.
Setting Convection Auto Conversion
When Conv. Bake and Conv. Roast are selected,
Convection Auto Conversion automatically
converts the standard recipe temperature entered
to a convection temperature by subtracting 25 ℉ /
14 ℃. This auto converted temperature shows on
the display. For example, select Conv. Bake, enter
350 ℉, and 325 ℉ shows on the display after
preheat.
Convection Auto Conversion is enabled by default.
To change the setting, follow these instructions.
1
Press Settings repeatedly until Auto appears
in the display.
2
Press 1 to disable or enable auto conversion.
3
Press START to accept the change.
Adjusting the Oven Temperature
Your new oven may cook differently from the one
it replaced. Use your new oven for a few weeks to
become more familiar with it before changing the
temperature settings. If after familiarizing yourself
with the new oven, you still think that it is too hot
or too cold, you can adjust the oven temperature
yourself.
• To begin, either raise or lower the temperature
15℉ (8 ℃). Try the oven with the new setting. If
the oven still needs adjustment, raise or lower
the temperature again, using the first
adjustment as a gauge. For example, if the
adjustment was too much, raise or lower the
temperature 10 ℉ (5 ℃). If the adjustment was
not enough, raise or lower the temperature 20 ℉
(12 ℃). Proceed in this way until the oven is
adjusted to your satisfaction.
1
Set the oven mode knob to the Off position.
2
a
Press Settings
repeatedly until AdJU
appears in the display.
3
Use the number buttons
number of degrees you want to adjust the
oven temperature.
4
Adjust the temperature either up or down by
pressing Settings repeatedly to toggle
between plus (+) or minus (-).
5
c
Press START
to accept the change.
OPERATION
27
b
to enter the
Publicidad
