Jocel JFE 014641 Manual De Instrucciones página 85

INSTALLATION AND CONNECTION
▲
Material damage!
The door and/or handle must not be used for lifting or moving the appliance.
•
For installation the appliance must be connected in accordance with all local gas
and/or electrical regulations.
•
Carry the appliance with at least two persons.
•
Use the slots or wire handles located at both sides to move the appliance.
CONNECTION TO THE MAINS SUPPLY
THIS APPLIANCE MUST BE EARTHED!
•
Our company shall not be held responsible for any damage caused by using
the appliance without an earthed socket. Risk of electric shock, short circuit
or fire by unprofessional installation! The appliance may be connected to the
mains supply only by an authorized qualified person and the appliance is only
guaranteed after correct installation.
•
Risk of electric shock, short circuit or fire by damage of the mains lead! The
mains lead must not be clamped, bent or trapped or come into contact with
hot parts of the appliance. If the mains lead is damaged, it must be replaced
by a qualified electrician.
•
The mains supply must correspond to be data specified on the rating plate of
the appliance. The appliance mains cable must correspond to the
specifications and the power consumption.
RISK OF ELECTRIC SHOCK!
Before starting any work on the electrical installation, please disconnect
the appliance from the mains supply.
INSTALLATION METHOD
85