Elite JUSTO Instrucciones página 45

any increase in resistance to the pedalling
won't be felt.
Technical specs
Description
Installed product size
(no bicycle)
Power supply data
Weight (no bicycle)
Maximum load
The product has been designed for use by a single
cyclist or user.
Name and list of components (pic. 1)
Included components
Ref. Description
A Home trainer
B Freehub body Spacer
C Chainstay adapter
D
Right quick release adapter 130-135mm
E
Left quick release adapter 130-135mm
F
Right Thru-axle adapter 142mm
G
Left Thru-axle adapter 142mm
H
Quick release
I
Riser block
L
Power adapter
Q
Freehub body
R
Freehub clamping nut
S
Rigid black feet
T
Flywheel guard
U
Flywheel guard screws TCIC 3,5x16
Components not included
Rif. Descrizione
M Sprocket cassette
N Sleeve locking cassette
O Sprocket cassette ejector
P Thru-axle
* not included in the packaging
** pre-installed on the product
Adatpers are smaller-sized components and
can easily be misplaced.If you move your
home trainer we suggest to remove them and
store them in your bag.
• Use the product only for the intended purposes.
• Before starting a workout, place the home trainer in an ap-
propriate environment, far from potentially dangerous objects
(furniture, tables, chairs...) in order to avoid any possible in-
voluntary or accidental contact with the objects themselves.
Data
• Make sure the bicycle is properly fastened to the home
57 x 72 x 52 cm
trainer before working out. The bicycle must be positioned
vertically and securely fastened on the intended supports as
indicated in these instructions. Do not start working out if it's
Input: 100-240 V
not properly fastened.
50-60hz 0,6 A
• The Manufacturer cannot be held liable for any injury cau-
Output: 12 V 1,5 A
sed by malfunctions of the bicycle components. Pay extra
17 kg
care to the fastening and the tightening torque of all bicycle
115 kg
compoennts, if you have any doubts have the bicycle che-
cked by a technician before fastening it to the home trainer.
• If you experience any anomalous vibrations check and
tighten all screws or nuts on the product.
• The product has been designed and manufactured to en-
sure maximum safety for users and/or third parties but it's still
necessary to prevent people, children or animals from getting
close to the home trainer when being used as the moving
Nr.
parts of the home trainer and bicycle might cause damages
1
or injuries should they come into contact.
• Avoid placing your fi ngers or any object inside the slots in
2
the product as the risk to damage the home trainer and /or
1
cause serious injuries to people is high.
1
• The home traine does not have an emergency brake,
therefore based on speed its inertia might make it continue
1
rotating for some time.
1
• During intense and continuous use the structure around
1
the brake might reach high temperatures. Always wait for it
1
to cool down before moving or disassembling the product.
• Even though there are areas that might reach high tem-
1
peratures, protected as they may be, the home trainer must
1
not come into contact with fl ammable elements or liquids (ie.
**
paper, rags, alcohol etc.) that might cause a fi re.
** • There are no components that can be used individually in
the home trainer.
2
• As the feet are built in anti-slip soft rubber material, during
1
use they might leave rubber marks on the fl oor.
2
• Do not store the product in wet or damp environments as
it might damage its electronic components.
• The Manufacturer cannot be held liable for any malfun-
ction with non-compatible software / apps / devices.
N.
• Interferences might be casued by: other wireless recei-
*
vers, the presence of high voltage power lines, traffi c lights,
* electric railway lines, electric bus or tram lines, tv devices,
cars, cycle computers, gym equipment or mobile phones in
*
its range. Interferences might alter or totally inhibit product
*
performance.
• Do not expose the product to direct sunlight for longer
periods of time.
• Do not leave thehome trainer power supply connected
when not in use
• Only use the supplied power supply. Product conformity
might fail if your don't use the supplied power supply.
SAFETY WARNINGS
EN
45