Elite JUSTO Instrucciones página 46

The aforementioned warnings are general and
not exhaustive of all precautions that must be
taked for the proper and safe use of the home
trainer, for which the user is exclusively re-
sponsible.
TRANSPORTATION AND PACKAGING
Transportation and handling
The product comes tightly packed so it's protected from
shocks and weather, nevertheless it must be carefully tran-
sported and raised by one or more users based on its weight.
The fi rst thing to do once you open the packaging is a general
check of all the product parts; make sure all components are
accounted for and in perfect condition.
Please remember that all packaging elements
(carton, cellophane, staples, adhesive tape
etc.) may injure you if mishandled. They must
be properly removed and not left unattended,
available to those who can't manage them; the
same goes for the tools used to remove packa-
EN
ging, installation or maintenance (scissors,
screwdrivers, pliers etc).
46
Component
For the separate waste collection of these materials please
refer to the local provisions of the relevant authorities.
Should the home trainer be shipped to customer service or
other reasons, it is imperative to pack it properly.
• Unplug the home trainer power cord;
• pack the product in its original packaging.
When shipped, boxes are often subject to shocks and mistre-
atment, so if packaging isn't sturdy enough (ie. non-original
packaging) it might irreparabely damage the home trainer.
Symbol Notes
Home trainer external
packaging is made in
corrugated cardboard.
The internal protective
linings are made in ex-
panded polyethylene.
Tools are collected in
low density polyethylene
bags.
The home trainer power
adapter is packed in a
non-corrugated
box.
Such damages are not covered by the warranty conditions.
Before sending the home trainer or any of its
components to customer service please con-
sult the Manufacturer or your local retailer.
Any non-planned shipments might be refused.
Home trainer assembly (pic. 3)
• Unpack the home trainer A.
• Place the home trainer A in a vertical position and hold it
in place via the upper handle.
• Unfold the side legs to their limit so the locking system
triggers.
• Adjust the stability of the home trainer by tightening or un-
tightening the adjustable feet.
• Remove the polyethylene cover from the fl ywheel.
• Lock in the fl ywheel guard T using the two fastening
screws U.
Freehub body compatiblity
The product is supplied by the Manufacturer with a preinstal-
led freehub body compatible with the following transmissions:
Speed bicycle transmission Compatibility
Shimano
9
Campagnolo
Shimano
10
Campagnolo
Shimano
11
Campagnolo
Shimano
Campagnolo
12
Shimano
MTB
SRAM
Chain stay compatibility (pic. 2)
The home trainer is compatible with bicycles featuring a rear
chain stay with the following measurements:
Type of fastening chain stay mea-
carton
Quick release
Ø 5 mm
Thru-axle
Ø 10 mm
INSTALLATION
/ SRAM
® ®
optional - cod. 1014233
®
/ SRAM
® ®
optional - cod. 1014233
®
/ SRAM
® ®
optional - cod. 1014233
®
/ SRAM
® ®
optional - cod. 1014233
®
Micro Spline
®
optional - cod. 1014315
XD/XDR optional - cod. 1014279
®
Compatibility
surement (f.2)
130 mm
135 mm
141 mm
cod. 1014330
135 mm
cod. 1014306
optional
optional