Publicidad
Idiomas disponibles
Idiomas disponibles
ProCore Edge 30 North America
4.3 Positioning the Charger
CAUTION
The battery charger, when fitted with modules, can be very heavy.
Take precautions to avoid injury when moving the charger.
Use appropriate material handling aids (e.g., a pallet truck) to move
the charger into position. It is recommended to make use of a lifting
hoist (with straps or chains) wherever possible, especially when the
charger is raised above ground level.
Lifting eyebolts (M8 thread) can be attached to four locations on
the top panel of the charger to aid the process (Figure 5). Remove
the filler screws with a 4-mm hex key before attaching the lifting
eyebolts
Figure 5 Attaching Points for M8 Lifting Eyebolts, Top Panel View
5912995 A01
Webasto Charging Systems, Inc.
14 of 68
IOMM
Publicidad
