Publicidad
Idiomas disponibles
Idiomas disponibles
ProCore Edge 30 North America
Display
Message
BATTERY
TEMP
(Battery over
temperature
The battery
temperature is
too high.)
Battery
Temperature
Sensor Failure
Battery Voltage
Mismatch
Battery Voltage
Reversed
BMID LOST
COMM
(BMID
Communication
is Lost)
Charger
Configuration
Access
5912995 A01
Message
Description
type
The batter temperature is
too high (i.e., above the
battery table maximum
temperature) to charge.
A faulty battery cannot
Fault
accept a high-charge
current.
An incorrect BMID setting
is resulting in a faulty
battery overheating.
The temperature sensor
Warning
reading is out of the valid
range.
The difference between the
battery reported voltage
Fault
and corrected local voltage
exceeds 2 volts.
Positive and negative
Fault
terminals are reversed on
the battery connection.
There are damaged BMID
communication (comm)
Fault
wires in the charger output
cable or in the vehicle.
The charge could not
Fault
read charge configuration
settings.
62 of 68
Action(s)
Let the battery cool before
charging.
Service the battery.
Use the ProCore App to
correct the BMID settings.
Check the battery
temperature sensor
wiring for damage.
Check for output cable
damage causing an
excessive voltage drop.
Fix the output cable
connection polarity.
Repair the wiring.
Call Webasto service.
Webasto Charging Systems, Inc.
IOMM
Publicidad
