Publicidad
Idiomas disponibles
Idiomas disponibles
IOMM
ProCore Edge 30 North America
9.1.8. Reconnect the DC output cable (Figure 37) and AC input
power cable (Figure 38) that were disconnected in step 9.1.2.
9.1.9. Reconnect the ground cable that was disconnected in step
9.1.3 with an M4 flange nut and tighten it with 18.5 in-lbs (2 Nm) of
torque (Figure 38).
Figure 37
Figure 38
Reconnected DC
Reconnected Ground
Output Power Cable
Cable and AC Input
Power Cable
Close the charger door and use the flathead screwdriver to turn
the latch counterclockwise to lock the door.
9.2. Air Filter Replacement (not yet available)
9.3. Preventive Maintenance Activities
Table 2 on the following page describes the preventive maintenance
activities for the first three years of the system life.
Webasto Charging Systems, Inc.
5912995 A01
57 of 68
Publicidad
