Webasto ProCore Edge 30 Manual De Instalación, Funcionamiento Y Mantenimiento página 44

ProCore Edge 30 North America
8.2 Buttons
NOTE
ProCore Edge starts charging automatically when you connect a
vehicle. You can disconnect a vehicle safely from ProCore Edge even
while charging. You do not need to start or stop the charge with the
following buttons.
Button
Start
Stop
5912995 A01
Function
If the charger is in the Charge Stopped state, then press the
Start button (Figure 24) momentarily to restart the charge.
Press and hold the Start button for three seconds to switch
from the graphical battery display (Figure 24) to the alternate
tabular battery display (Figure 25). Press and hold the Start
button for three seconds again to switch back to the graphical
battery display.
Press the Stop button (Figure 24) to stop the charge.
The charger displays, on the status bar, "Charge Stopped."
44 of 68
Webasto Charging Systems, Inc.
IOMM