Normativas Atendidas; Certificaciones - WEG CFW700 Serie Manual Del Usuario

8.3 NORMATIVAS ATENDIDAS

NORMAS DE
„
SEGURIDAD
„
„
„
„
„
„
NORMAS DE
„
COMPATIBILIDAD
ELECTROMAGNÉTICA
„
(EMC)
„
„
„
„
„
NORMAS DE
„
CONSTRUCCIÓN
„
MECÁNICA

8.4 CERTIFICACIONES

Certificaciones (*)
UL y cUL E184430
CE
IRAM
C-Tick
EAC
Functional Safety Función STO, con certificado emitido por TÜV Rheinland
(Seguridad funcional)
(*) Para información actualizada sobre certificaciones consultar a WEG.
Tabla 8.2: Normativas atendidas
UL 508C - Power Power conversion equipment.
Nota: Suitable for Installation in a compartment handling conditioned air.
UL 840 -Insulation coordination including clearances and creepage distances
for electrical equipment.
EN61800-5-1 - Safety requirements electrical, thermal and energy.
EN 50178 - Electronic equipment for use in power installations.
EN 60204-1 - Safety of machinery. Electrical equipment of machines. Part 1:
General requirements.
Nota: Para tener una máquina en conformidad con esa normativa, el fabricante
de la máquina es responsable por la instalación de un dispositivo para la parada
de emergencia y un equipamiento para seccionar la red eléctrica.
EN 60146 (IEC 146) - Semiconductor converters.
EN 61800-2 -Adjustable speed electrical power drive systems - Part 2: General
requirements - Rating specifications for low voltage adjustable frequency AC
power drive systems.
EN 61800-3 - Adjustable speed electrical power drive systems - Part 3: EMC
product standard including specific test methods.
CISPR 11 -Industrial, scientific and medical (ISM) radio-frequency equipment
- Electromagnetic disturbance characteristics - Limits and methods of
measurement.
EN 61000-4-2 -Electromagnetic compatibility (EMC) - Part 4: Testing and
measurement techniques - Section 2: Electrostatic discharge immunity test.
EN 61000-4-3 -Electromagnetic compatibility (EMC) - Part 4: Testing and
measurement techniques -Section 3: Radiated, radio-frequency, electromagnetic
field immunity test.
EN 61000-4-4 -Electromagnetic compatibility (EMC) - Part 4: Testing and
measurement techniques - Section 4: Electrical fast transient/burst immunity test.
EN 61000-4-5 -Electromagnetic compatibility (EMC) - Part 4: Testing and
measurement techniques - Section 5: Surge immunity test.
EN 61000-4-6 -Electromagnetic compatibility (EMC) - Part 4: Testing and
measurement techniques - Section 6: Immunity to conducted disturbances,
induced by radio-frequency fields.
EN 60529 - Degrees of protection provided by enclosures (IP code).
UL 50 - Enclosures for electrical equipment.
Especificaciones Técnicas
Observaciones
CFW700 | 137