C. THE HELMET
10. VISOR WITH ANTI-FOG LENS
The visor is a fog-free double-lens visor. By fixing the inner anti-fog lens using
eccentric pins, the two visor panes are pre-tensioned together and are thereby
sealed. An insulating air cushion is thus formed between the visor's main plate –
i.e. the outer plate – and the inner plate, which prevents any fogging up of the
inner plate.
COATING
The main visor has an anti-scratch coating.
Note:
The helmet should never be used to hold gloves or any other objects as
this may damage the scratch-sensitive anti-fog lens.
Note:
The anti-fog lens is supplied with a protective film. Remove this film before
using the helmet for the first time.
Note:
The visor is supplied with a protective foil. Remove this foil before using
the helmet for the first time.
OPENING THE VISOR
To open the visor, use your thumb to push the
visor up using one of the finger tabs situated to
the left and right of the visor, and move it to the
desired position.
VISOR (INCLUDING CITY POSITION)
The second position (city position) locks in place more firmly, providing greater
resistance when the visor is in this position. This makes it easier to lock the
visor in the city position, especially while riding.
EN
19