SCHUBERTH E2 Manual página 7

A. FOR YOUR SAFETY
Examine the helmet for damage at regular intervals. Small scratches will
not impair the protective function of your helmet.
The helmet should be replaced after 5 to 7 years, depending on use and
care. Although the outer shell is in principle capable of a longer service life,
the occurrence of material fatigue and wear to other components, as well
as the overall action of the helmet and the unknown conditions in which
the helmet has been used, make it advisable for your own safety to replace
the helmet after this period of use.
Excessive heat (e.g. exhaust heat) can cause damage to the decoration,
the inner shell of the helmet and the interior lining.
Direct contact with motor fuel, thinners or solvents can destroy the
structure of the inner and outer shell. Make sure the helmet does not
come into contact with such substances, even for cleaning purposes.
Do not apply paint, stickers, petrol or other solvents to this helmet.
2. SAFETY ADVICE CONCERNING THE VISOR/
SUN VISOR
The protective film used during shipping should be removed before use.
The anti-fog lens is supplied with a protective film. Remove this film
before using the helmet for the first time.
Any scratches and/or dirt arising from the use of the visor and/or sun
visors significantly impair your vision in any driving situation and thus
increase the risk of an accident. For your own safety, replace them or
clean them immediately.
Never use a tinted visor with marking "daytime use only" in conditions of
poor visibility, at night or in a tunnel!
Benzine, solvent and fuel vapor can cause cracks in the visor. Keep the
visor away from such vapors and do not allow these kinds of substances
to come into direct contact with the visor! Never place the helmet on the
tank of your motorcycle.
Make sure the visor is always in perfect condition. Don't ride when visibility
is poor!
EN
7