SCHUBERTH E2 Manual página 43

F. MAINTENANCE AND CARE
1. HELMET SHELL
To clean the helmet shell, you can use water, soap or one of the commonly
available motorcycle shampoos, cleaners, polishes, plastic cleaners or cleaning
fluids. Using water and soap is usually sufficient. Make sure when using the
other cleaning materials that these do not come into contact with the visor,
since they can cause damage to the visor and its coating.
Note:
Never use motor fuel, thinners or solvents to clean the helmet. These
substances can cause serious damage to the helmet with no external
signs. The full safety function of the helmet can then no longer be
guaranteed.
2. CHIN BAR
Please check the functionality of the chin bar at regular intervals.
Caution:
Alterations to the strap buckle are not permitted. In particular, you should
not oil or grease the metal components of the chin bar lock. Repairs may
only be carried out by the SCHUBERTH Repair Service.
3. VISOR AND SUN VISOR
OUTER SURFACE OF THE VISOR
Use a soft cloth and a mild soap solution (< 20 °C) to remove dirt from the
outside of the visor. To dry the visor, use a lint-free cloth and apply gentle
pressure.
EN
43