Spengler TENSONIC Manual página 50

Unit Operation
50
2. With sticky nylon section facing outward, insert end of cuff underneath
metal ring of cuff.
3. Fasten cuff about 1-2cm (0.4-0.8'') above the elbow joint. For best results
apply cuff to bare arm and keep level with heart while testing.
Note: Do not insert air plug into opening located on right side of monitor
unit. This opening is designed for an optional power supply only.
Testing
1. Power On
Press and hold « START/STOP « button to turn the unit on. The LCD screen
will appear for one second as unit performs a quick diagnosis. A voice tone
indicates unit is ready for testing.
www.spengler.fr
ã ã e Ö= â m ~
L =
^ s d
( )
( )
No