Spengler TENSONIC Manual página 54

Unit Operation
54
Memory Check and Test Average
With power off, you may check past test results and test average using the
«M» button.
First the average value of all saved measurements from selected group is dis-
played. Press the «M»button again, the screen will display the average of last se-
ven days test results for 5:00am~8:59. Press the «M»button again,and the screen
will display the average of last seven days test results for 18:00pm~19:59pm.
Press the «M» button again,you may check past test results,the most recent test
result can be viewed. Upon activating test results, you can press the «M» button
to scroll though all test results stored in memory.
To check previous test in other memory groups,you must first select the desi-
red group and then turn monitor off (see «select Memory Group» on Page 48)
NOTE : If there's no results saved, the systolic Blood Pressure, Diastolic Blood
Pressure and Pulse Rate will display «
www.spengler.fr
AV G
/
No
/
mmHg
AV G
/
mmHg
/
».