2. Signs and symbols
The following symbols appear in the instructions for use and on the device:
Warning
Warning instruction indicating a risk of
injury or damage to health
Important
Safety note indicating possible dama-
ge to the device/accessory
Product information
Note on important information
For indoor use only
Separate the packaging elements
and dispose of them in accordance
with local regulations.
Marking to identify the packaging
material.
A = Material code, B = Material
number:
1-7 = Plastics, 20-22 = Paper and
cardboard
Disposal in accordance with the
Waste Electrical and Electronic
Equipment EC Directive – WEEE
Protection class II device
The device is double-protected
and thus corresponds to protection
class 2
Class III equipment
Separate the product and packaging
elements and dispose of them in
accordance with local regulations.
Manufacturer
CE labelling
This product satisfies the require-
ments of the applicable European
and national directives.
United Kingdom Conformity
Assessed Mark
3. Warnings and safety notes
Read these instructions for use carefully! Non-observance of the following information may result in personal injury
or material damage. Store these instructions for use and make them accessible to other users. Make sure you
include these instructions for use when handing over the device to third parties.
Energy efficiency level 6
Polarity of d.c. power connector
Protected against solid foreign objects
IP20
12.5 mm in diameter and larger
Direct current
The device is suitable for use with direct
current only
Safety isolating transformer, short-
circuit proo
Power supply unit, switch mode; switch
mode power supply unit; SMPS
Do not insert pins!
Must not be used by very young children
(0-3 years old).
Do not wash
Do not bleach
Do not dry in a tumble dryer
Do not dry-clean
The products demonstrably meet the
requirements of the Technical Regulations
of the EAEU.
11