+00EH99858901_01EN_4-way_IM_printOnly.book Page 35 Tuesday, December 4, 2007 2:31 PM
4-way Air Discharge Cassette Type
11
TROUBLE SHOOTING
Confirmation and check
When a trouble occurred in the air conditioner, the
check code and the indoor unit No. appear on the
display part of the remote controller.
The check code is only displayed during the
operation.
If the display disappears, operate the air
conditioner according to the following
"Confirmation of error history" for confirmation.
Check code
Confirmation of error
history
When a trouble occurred on the air conditioner,
the trouble history can be confirmed with the
following procedure. (The trouble history is stored
in memory up to 4 troubles.)
The history can be confirmed from both operating
status and stop status.
2
3
Procedure
When pushing
time for 4 seconds or more, the following display
appears.
If [Service check]
enters in the trouble history mode.
• [01 : Order of trouble history] is displayed in
CODE No. window.
• [Check code] is displayed in CHECK window.
• [Indoor unit address in which an error occurred]
is displayed in Unit No.
35-EN
Indoor unit No. in which
an error occurred
1
1
and
buttons at the same
is displayed, the mode
2
Procedure
Every pushing of
temperature, the trouble history stored in memory
is displayed in order.
The numbers in CODE No. indicate CODE No.
[01] (latest) → [04] (oldest).
REQUIREMENT
Do not push
button because all the trouble
history of the indoor unit will be deleted.
3
Procedure
After confirmation, push
usual display.
– 35 –
Installation Manual
button used to set
button to return to the
Toshiba XXXXXXX(X/X)