Publicidad
Idiomas disponibles
Idiomas disponibles
and, if necessary, use the preparation for cleaning the
utensils, and then dry it.
3. Water flow cannot be used to clean the electrother-
mal dryer and water is placed to clean the base of the
electrothermal dryer. Clean the dirty surface of the
base of the electric heater dryer with a wet rag.
4. Abrasive cleaners, metal brushes and organic
solvents should not be used.
5. Store the cleaned products in a cool and ventilated
environment.
Chapter VII Faults and
Troubleshooting Methods
Fault
Product does not work
When the product works,
the lamp is not on.
The product works
without hot air.
Reason
1. Forgot to plug in the power
plug or the plug is loose.
2. Power outlet damaged
3. Power cord damage
Power Indicator Damaged
1. The fuse is blown out
2. That heat wire burns out
Solution
Plug in the plug
Replace power socket
Send to designated
department or professional
maintenance personnel
for replacement
Send to designated
department or professional
maintenance personnel for
replacement
Send to designated
department or professional
maintenance personnel for
replacement or scrap
Send to designated
department or professional
maintenance personnel
for replacement or scrap
010
Publicidad
