Yamaha 40V Manual Del Propietário página 46

E
EMU01124
Power Trim/Tilt Switch
The power trim/tilt adjusts the motor
DN UP
angle in relation to the transom. The
power trim/tilt switch is located on the
tiller handle. Pushing the switch "UP"
trims the motor up, then tilts the motor
up. Pressing the switch "DN" tilts the
motor down and trims the motor down.
501041*
When the switch button is released, the
motor will stop in its current position.
NOTE:
Refer to the sections "Adjusting Trim
Angle" and "Tilting Up/Down" in Chapter
3 for instructions on usage.
2-9