5) With the outboard motor in an verti-
cal position, using a flexible or pres-
surized filling device, inject outboard
motor hypoid gear oil (SAE 90) into
the oil drain plug hole.
Gear oil capacity:
Refer to"SPECIFICATIONS", Page 4-1.
6) When oil begins to flow out of the oil
601015
level plug hole, insert and tighten the
oil level plug.
7) Insert and tighten the oil drain plug.
EML22011
CLEANING FUEL TANK
w
Gasoline (petrol) is highly flammable, and
its vapors are flammable and explosive.
8 If you have any question about properly
doing this procedure, consult your
Yamaha dealer.
8 Keep away from sparks, cigarettes,
flames or other sources of ignition
when cleaning the fuel tank.
8 Remove the fuel tank from the boat
before cleaning it. Work only outdoors
in an area with good ventilation.
8 Wipe up any spilled fuel immediately.
8 Reassemble the fuel tank carefully.
Improper assembly can result in a fuel
leak, which could result in a fire or
explosion hazard.
8 Dispose of old gasoline (petrol)accord-
ing to local regulations.
4-24
E