6. Data collection in the computer
6.1. RS232 output port
Baud rate: 4800 bps
8 bits - non-parity 1 stop bit (8, n, 1)
A serial printer, a data collecting device, a communication software
equipped PC, etc. can be connected to the instrument RS232 data output.
6.2. Transfer data to a computer
To transfer data from the MD-1035e to a PC computer, use the cable
provided with the accessories. Connect it to RS232 PORT &, and the
opposite end of your PC RS232 connector.
Open Windows "Start Menu", then go to "Programs", "Accessories",
"Communications", until you get to "Hyper Terminal", as shown in the
figure below:
Meu computador
Meus locais de rede
Windows Explorer
Lixeira
Programas
Documentos
softwares
Configurações
Pesquisar
Ajuda
Executar
Desligar
Iniciar
18
12:00