Publicidad
Idiomas disponibles
Idiomas disponibles
EN
10.12 CLEANING THE HEAT EXCHANGER FUME
PASSAGE
l
Recommended cleaning frequency: consult the para-
graph
"Scheduled
maintenance".
To dispose of any ash, consult the paragraph
■
disposal".
TOOLS TO BE USED; ash vacuum device equipped
■
with a fine-mesh filter in order to prevent part of the
ash from being blown into the room.
To clean the heat exchanger fume passage, proceed as follows:
- raise the pellet tank cover, loosen the screws (1) of the hot air ex-
haust grille and remove it
- loosen the screws (2) of the side panel and remove it
34
1
Fig. 42
2
Fig. 43
- loosen the screws (3) of the heat exchanger cover and remove it
- using a suitable vacuum cleaner, vacuum any dust residues on the
heat exchanger
"Ash
- while holding the heat exchanger with one hand to prevent it from
falling, loosen the nuts (4) and remove it
a
Extract the heat exchanger with both hands.
- gently dust the side wall of the stove using a brush.
Repeat the operation also for the side opposite to the appliance.
a
To ensure proper tightness of the seal, when mount-
ing the heat exchangers back on, fasten the nuts (4)
according to the sequence a, b, c, d.
MAINTENANCE
3
Fig. 44
4
d
a
b
c
Fig. 45
CS.SB80.IST_EN_Rev. 2.0_09-23
Publicidad
