Publicidad
Idiomas disponibles
Idiomas disponibles
Harness Length Adjustment
1 -
If shoulder harness needs to be
lengthened to secure your child,
loosen the harness by pressing
on adjustment button (1) while
pulling on the harness straps. (2)
Handle Adjustment
2
- The carrier handle can be
adjusted to 3 positions.
3
- To adjust the handle position,
squeeze handle buttons on
both sides. (1)
Rotate handle until it clicks
into any of the 3 positions. (2)
Handle can be used in vehicle
in any locked position.
Be sure handle is locked in the
carry position before lifting
child restraint by handle. An
unlocked handle could move
unexpectedly, causing injury to
child.
Handle MUST NOT contact the
vehicle interior (side of car or
seat in front) when installed.
26 PIPA lite rx instructions
1
1
2
2
Position 1
Position 2
Position 3
3
2
1
PIPA lite rx instructions
27
Publicidad
