Publicidad
Idiomas disponibles
Idiomas disponibles
ENGLISH
HAZARDS AND SAFETY PROVISIONS DURING APPLIANCE DECOMMISSIONING
When decommissioning the appliance, watch out for the following hazards and provide for the
countermeasures indicated below:
► Source of hazard: Electric power
Hazard
Risk of electric
shock caused by
live components
► Source of hazard: Handling of heavy loads Source of hazard:
Hazard
Risk of injury due
to body overload
► Risk generated by materials/substances
Hazard
Concentration
of unburned gas
emissions due to
an incorrect appli-
ance decommis-
sioning
12
Where or in which situations
does the hazard occur?
• On the power cable
• Under protective panels
• Under the control panel
• Under protection covers
Where or in which situations
does the hazard occur?
When the appliance
moves
Where or in which situations
does the hazard occur?
During appliance decom-
missioning
Countermeasures
• Operations to the electric
system may be carried out
by authorised and qualified
staff only, in accordance
with the relevant applica-
ble laws .
• Specialist procedure
• Turn off the power supply
before removing the covers
• Secure it to prevent acci-
dental switching on
• Ensure that there is no volt-
age
Countermeasures
• Use a suitable lifting
device
• observe the limit values
for lifting and transport
• Wear personal protec-
tive equipment
Countermeasures
Decommissioning opera-
tions must be carried out
by qualified personnel
SAFETY
Safety device
• Protection
panels
• System
switch-dis-
connector
Safety device
• Protective gloves
• Protective shoes
• Safety helmet
(e .g . for sus-
pended loads,
overhead opera-
tions . . .)
Safety device
None
3413940_ut_GB
Publicidad
