Angelo Po 1S1PI1G Manual De Uso página 48

ENGLISH
To carry out this operation, proceed as follows .
Raise the lid (A) .
1)
Turn the water spout ( (B) towards the pan .
2)
Turn on the water taps (C) to fill the pan to a
3)
level between the two marks (D) .
IMPORTANT: For faster boiling ti-
mes, use hot water only; use cold water only
when specifically required .
Turn the water spout outward and then close
4)
the lid (A) .
WARNING: Never use the appliance
with no water in the well, as this may dama-
ge its structure .
To carry out this operation, proceed as follows
Turn on the tap (A) .
1)
Unscrew the cap (B) .
2)
Turn the water spout (C) towards the filler con-
3)
nection (D) .
Turn on the taps (E) to fill the jacket .
4)
When water starts to flow from the tap (A)
5)
turn off the taps (E) to avoid overfilling .
Turn the tap (A) fully off and screw the cap (B)
6)
back into place .
To empty the jacket, unscrew the cap (F) pro-
7)
vided underneath the appliance .
WARNING: Never open the jacket fil-
ler cap (B) or the level checking tap (A) when
the appliance is in operation or still hot .
20
FILLING THE PAN
D
FILLING THE JACKET
C
D
F
USE AND OPERATION
B
A
C
B
E
A
3413940_ut_GB