Dreame DreameBot D10s Plus Manual De Usuario página 13

Connecting with the Dreamehome App
This product works with the Dreamehome app, which can be used to control your device.
1. Download the Dreamehome App
Scan the QR code on the robot, or search "Dreamehome" in the
app store to download and install the app based on your needs.
2. Add Device
Open the Dreamehome app, tap "
scan the QR code above again to add "DreameBot D10s Plus".
Please follow the prompts to finish the Wi-Fi connection.
Note:
· Only 2.4 GHz Wi-Fi networks are supported.
· Due to upgrades in the app software, the actual operations may be different from the
statements in this manual. Please follow the instructions based on the current app
version.
Under the
Cover
" in the upper right, and then
3. Reset Wi-Fi
Simultaneously press and hold the buttons
hear a voice say, "Waiting for the network configuration." Once the
Wi-Fi indicator is blinking slowly, the Wi-Fi has been successfully
reset.
Note: If your robot cannot connect to the app successfully, reset the Wi-Fi and add the
device again.
and until you
Wi-Fi Indicator
·Blinking slowly: To be connected
·Blinking quickly: Connecting
·On: Connected
EN
11