Dreame DreameBot D10s Plus Manual De Usuario página 16

Routine Maintenance
EN
Parts
To keep the robot in good condition, it is recommended to refer to the
following table for routine maintenance.
Part
Mop pad
Main brush
Dust bin filter
Side brush
Auto-empty base's
signaling area
Charging contacts
Auto-empty vent
Universal wheel
Laser Distance
Sensor (LDS)
AI visual sensor
Cliff sensors
Water tank
Dust bin
Dust collection bag
Note: The replacement frequency will depend on your usage of the robot. If an exception
occurs due to special circumstances, the parts should be replaced.
14
Maintenance
Replacement Period
Frequency
After each use Every 3 to 6 months
Every 6 to 12 months
Once every 2 weeks
Every 3 to 6 months
/
Once every month
/
Clean it as needed
/ 8-10 weeks
Clean the Dust Bin and Filter
1. Open the robot cover and press the bin clip to remove the dust bin.
2. Open the bin cover and empty the bin as shown in the diagram.
3. Clean the auto-empty vent.