Publicidad
Idiomas disponibles
Idiomas disponibles
SAFETY
NOTE: Only applies to electrical appliances .
► Source of hazard: electric power
Hazard
Risk of electric
shock caused by
live components
Risk
of
electric
shock caused by
live parts
3413950_ut_GB
Where or in which situations
does the hazard occur?
• Under protective panels
• Under the control panel
• Under protection covers
• On the appliance and on
the adjacent metal parts
• On the appliance and on
the adjacent metal acces-
sories
Countermeasures
• Operations to the electric
system may be carried out
by authorised and qualified
staff only, in accordance
with the relevant applica-
ble laws .
• Specialist procedure
• Comply with the correct in-
stallation requirements as
per section "Installing the
appliance" of the installa-
tion manual .
• Disable the power supply
before removing the pro-
tections
• Prevent the appliance from
being powered acciden-
tally .
• Ensure that there is no volt-
age
• Before commissioning the
appliance, check that all
electric connections are
not damaged
• Use a power supply cable
with the specifications indi-
cated in section "Electrical
connection" of the installa-
tion manual .
• Before appliance commis-
sioning, check that electri-
cal connections are secure-
ly fixed
• Before
commissioning,
make sure that the appli-
ance and its metal acces-
sories are connected to a
system for equipotential
bonding
ENGLISH
Safety
device
• Protection
panels
• System
switch-dis-
connector
Equipoten-
tial bonding
system
7
Publicidad
