Publicidad
Idiomas disponibles
Idiomas disponibles
personal protective equipment and when to use
them.
•
Regularly do a check of the condition of the personal
protective equipment.
•
Use approved hearing protection.
•
Use approved respiratory protection.
•
Use approved eye protection with side protection.
•
Use protective gloves.
•
Use boots with steel toe-cap and non-slip sole.
•
Use approved work clothing or equivalent close-
fitting clothing that has long sleeves and long legs.
Fire extinguisher
•
Keep a fire extinguisher near during operation.
•
Use a powder fire extinguisher or a carbon dioxide
fire extinguisher.
Work area safety
WARNING:
instructions that follow before you use the
product.
•
It is the responsibility of the user to analyse the
surface to be treated. The user should make a risk
assessment on the basis of the information obtained
about the surface to be treated and take proper
precautions for the work to be performed.
•
Do not use the product in fog, rain, strong winds,
cold weather, risk of lightning or other bad weather
conditions.
•
Look out for persons, objects and situations that can
prevent safe operation of the product.
•
Do not use the product in areas where fire or
explosions can occur. The product creates sparks
and flammable material can create ignition with the
dust or fumes.
•
Keep children, bystanders and animals away from
the work area and at a safe distance from the
product. Safe distance is 15 m/49 ft.
2111 - 001 - 21.07.2023
Read the warning
•
Make sure that bystanders and animals are not
in the work area and at a safe distance from the
product.
•
Make sure that only approved persons are in the
work area.
•
Keep the work area clean and fully illuminated.
Cluttered or dark areas invite accidents.
•
Remove objects such as screws, bolts, wires and
stones from the work area before you use the
product.
•
Make sure that there are no cables or hoses in the
operation direction of the product.
•
Make sure that uneven surfaces, such as welded
seams or floor joints, do not stop the product.
•
Make sure that there is sufficient airflow in the work
area.
Electrical safety
WARNING:
shocks from electrical products. Do not use
the product in bad weather conditions. Do
not touch lightning conductors and metal
objects. Always use the product as given in
this operator's manual to prevent injury.
WARNING:
with RCD (residual-current device). An RCD
decreases the risk of electrical shock.
WARNING:
unprotected parts in the power unit. Always
disconnect the power plug before you open
the door to the electrical box.
There is always a risk of
Always use a power supply
High voltage. There are
7
Publicidad
