SICK Smart Light Tower SLT060-0B010J700 Instrucciones De Operación página 30

OPERATING INSTRUCTIONS
4 Product description
4.1 Product characteristics
5 Operating elements and status indicators
en
30 O P E R A T I N G I N S T R U C T I O N S | SLT
The Smart Light Tower SLT is a signal lamp used for the visual display of, for example,
machine states or to indicate filling levels. With the Smart Light Buzzer SLB unit, the
device is also suitable for issuing acoustic alarms if needed.
The Smart Light Tower is an IO-Link device that communicates exclusively via the IO-
Link protocol with the higher-level IO-Link master assembly. The IO-Link communication
interface enables direct access to process data and parameter values. The required
IODD can be found at http://www.sick.com/slt.
The device has 20 LED segments. According to IO-Link standards, these LED segments
and the optional buzzer unit can be configured and operated individually. It is possible
to change device parameters during operation. Configuration is performed either via
the SICK SOPAS ET software (available free of charge at www.sick.com) or directly via
the PLC interface.
Further specifications can be found in the technical data
page 44).
9
1
5
2
3
4
5
ß
6
8
à
7
Cover
1
Main body
2
20 LED segment display
3
IO-Link status LED
4
Positionsmarkierung
5
Base
6
Waterproof foil
7
Fastening nut (M30)
8
Summereinheit (Optional)
9
M12 connection (IO-Link)
ß
½ inch thread
à
Display
Green LED lights up
(see "Technical data",
Description
Device switched on
8026183.1FJ5/2022-11-17 | SICK
Subject to change without notice