Disassembly And Disposal; Technical Data; Technical Specifications - SICK Smart Light Tower SLT060-0B010J700 Instrucciones De Operación

OPERATING INSTRUCTIONS
10

Disassembly and disposal

en
11 Maintenance
12

Technical data

12.1

Technical specifications

Part number
44 O P E R A T I N G I N S T R U C T I O N S | SLT
Table 4: Troubleshooting
LED/fault pattern
Off
The device must be disposed of in line with applicable country-specific regulations.
When disposing of them, you should try to recycle them (especially the precious met‐
als).
NOTE
Disposal of batteries, electrical and electronic devices
•
In accordance with international regulations, batteries, rechargeable batteries and
electrical and electronic devices must not be disposed of with household waste.
• The owner is required by law to dispose of these devices at the appropriate public
collection points at the end of their service life.
•
WEEE: This symbol on the product, its packaging or in the document
indicates that a product is subject to the specified regulations.
SICK devices are maintenance-free.
We do, however, recommend that the following activities are undertaken regularly:
• Clean the device
• Check the fittings and plug connectors
Use a soft cloth moistened with water to clean the device.
Do not use thinners, gasoline or oil.
In case of failure or damage of the SLT caused by aggressive media, no claims for
defects can be asserted.
No modifications may be made to devices.
Subject to change without notice. Specified product properties and technical data are
not written guarantees.
Cause
No voltage or voltage below
the limit values
Voltage interruptions
Device is defective
Smart Light Tower
SLT060-0B010J700
6075938
Measures
Check the power supply,
check all electrical connec‐
tions (cables and plug connec‐
tions)
Ensure there is a stable power
supply without interruptions
If the voltage supply is OK,
replace the device
Smart Light Buzzer
SLB060-0B010K700
6076072
8026183.1FJ5/2022-11-17 | SICK
Subject to change without notice